The Structural Engineer's Corner

Eng. Onorio Francesco Salvatore

[DOWNLOAD] Excel spreadsheet for evaluation of crack width according to Eurocode 2


Another addition for the Downloads section. In this post we’ll discuss about an Excel spreadsheet for the evaluation of the crack width in concrete structures. The inputs required are: INPUT Characteristic compressive cylinder strength fck 30 N/mm² Characteristic tensile strength of reinforcement fyk 500 N/mm² Base b 300 mm Height h 500 mm QP moment […]

Read the rest of this entry »

[DOWNLOAD] Moment of Inertia of the cracked section transformed to concrete for T-sections according to ACI 314


Following the Excel spreadsheet for the rectangular section, in the following you can download the spreadsheet for the evaluation of the Moment of Inertia of the cracked section transformed to concrete, Icr, for T-sections. The reference is the ACI 314R-11 “Guide to Simplified Design for Reinforced Concrete Buildings“. Basically, starting from the gross section:

Read the rest of this entry »

[DOWNLOAD] Moment of Inertia of the cracked section transformed to concrete for rectangular sections according to ACI 314


New addition for the Download section: the following Excel spread sheet calculates the Moment of Inertia of the cracked section transformed to concrete, Icr, for rectangular sections. The reference is the ACI 314R-11 “Guide to Simplified Design for Reinforced Concrete Buildings“. Basically, starting from the gross section:

Read the rest of this entry »